Skip to main content

PC Shut down issue fix


hello guys. are u having pc shut down issues? i also had that problem and i think i have a solution its working for me and m very happy to share it with you.

a year ago  my pc had an issue after i shut down the fans wont stop. i had to cut power from the plug manually. sometimes after gaming when i shut down the fan speed boosts very high and remain until i cut power manually. lately i plugged in a hard drive to the front usb port near the power switch. (please note that some casings may not have usb port near power switch) then after i shut down the fans boosted. i removed the usb hard from the port and the pc fully shut down. so i repeated it several times and it works. then i tried a different method. i kept my joypad or a pen drive plugged in while i shut down and it also works. so seems like its a usb port or power switch issue after all.

Comments

Popular posts from this blog

No POST fix. (updating)

Hello guys Recently i had an issue with my pc i ran into the worst issue which is no post a very frustrating issue indeed. No post issue ************* Pc dosnt give a beep on startup No boot Nothing shows on monitor So since i got this issue i have been trying to find a fix. Heres what i did 1. Removed both rams and see if motherboard sends long beep. If motherboards sends long beep it means your motherboard is ok 2. Cleaned ram using eraser (check youtube for that) 3. Bios restarted (check you tube) 4. Removed graphics card and tested no issue 5. So now comes the suspect its the power supply try changing it Why did i suspect power supply? When i turn on pc. Everything except graphics card fans runs perfectly Note : updates will still come hang in there Also check the video of my pc test. 07/11/2020 update *************** ok so i got the power supply got it installed. but still having the same issue. so i went through previous checkup and now i know the main issu...

WAKING UP YOUR PC

some people today are having issues waking up their pc from standby mode. this also happened to me recently so i did a lot of research and did everything i can to wake up my office cpu but the bastard didn't wake up from standby-mode after turning on it automatically goes to standby mode. even the monitor dont show anything totally blank. so here is what i did. when my pc went to standby-mode after turning it on i simply unplugged the power cable and re plugged it after 5 seconds and it was fixed. hope this works for you too.

HARD DRIVE NOT READING FIX

  so recently i bought a WD hard drive to take backup for office but accidently deleted the software included in the hard drive and then it didn't show up once plugged in . but it shows up on hidden icons. so i tried many ways and found a solution  step 1 i went to the following website  Western Digital Product Software Downloads step 2 i downloaded the following  WD Drive Utilities WD Drive Utilities features the ability to: Run drive diagnostics Manage RAID configuration (For RAID supported models) Erase and format drive Set drive sleep timer (on supported drives) Register drive Supported Products: My Passport, My Book, easystore, WD Drive Plus, WD Backup Drive next i installed it and went to its settings once it detected the hard drive and i format the hard in the default way and then it was fixed now it shows on mac as well